How to Replace Front Control Arms with Ball Joint 2017-2020 Hyundai Elantra

Shop TRQ on 1AAuto.com Control Arm with Ball Joint Set https://trq.video/ia-1ASFK08396 Control Arm with Ball Joint https://trq.video/ib-1ASLF01013 Control Arm with Ball Joint https://trq.video/ia-1ASLF01014 Shop TRQ on Amazon Control Arm with Ball Joint Set https://www.amazon.com/dp/B09HRQ7BFC Control Arm with Ball Joint https://www.amazon.com/dp/B09HRR824K Control Arm with Ball Joint https://www.amazon.com/dp/B09HRSHC67 This video shows you how to install new quality front control arms with ball joint from TRQ on your 2017-2020 Hyundai Elantra. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear. This repair was done on a 2017 Hyundai Elantra Value Edition 2.0L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles: 2017 Hyundai Elantra 2018 Hyundai Elantra 2019 Hyundai Elantra 2020 Hyundai Elantra Tools you will need: • Pry Bar https://trq.video/oaAX-1AXAA00020 • 19mm Wrench • 17mm Socket • 21mm Socket • Crowfoot Wrench • Ratchet • Socket Extensions • Torque Wrench https://trq.video/ob93-1AXAA00044 • Gloves https://trq.video/ocQD-1AXSS00048 • Rust Penetrant • Safety Glasses • Floor Jack • Jack Stands • Pole Jack • Wheel Chocks Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1 Check out our playlist: Hyundai Elantra 2017 - 2020 6th Generation: https://www.youtube.com/playlist?list=PLJVpHWuCEUX-1e_rLt0ssZmPAoDC7oqVK 📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: https://trq.video/appdownloadyt ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.