Toyota Tacoma Oil Change (3.5L V6) – Step-by-Step DIY for 3rd Gen (2016-2023)

Need to change the oil on your 3rd Gen Toyota Tacoma? In this video, I show the step-by-step process for performing an oil change on the 2016–2023 Tacoma with the 3.5L V6 engine. I cover all the tools, parts, torque specs, and tips you’ll need to make the job easy, whether it’s your first time or your tenth. This guide applies to all 3rd-generation Tacoma trims (SR, SR5, TRD Sport, TRD Off-Road, TRD Pro, and Limited) equipped with the 3.5L V6 engine. ⏱ Timestamps 0:00 – Introduction 0:22 – Tools and parts list 1:57 – Remove skid plate 2:29 – Drain engine oil 3:40 – Replace crush washer and reinstall drain plug 4:23 – Remove oil filter housing and drain 6:08 – Replace O-rings and oil filter 8:14 – Reinstall filter housing (torque specs) 8:55 – Add new oil (6.1–6.2 qt 0W-20) 9:12 – Check oil level and inspect for leaks 9:38 – Reinstall skid plate 9:51 – Reset maintenance reminder 10:45 - Outro 🔧 Tools & Parts Used (affiliate links help support the channel at no extra cost to you) - (2) 5-Quart 0W-20 Synthetic Oil – https://amzn.to/46XsZ0c - OEM Toyota Oil Filter (04152-YZZA1) – https://amzn.to/42Oooek - Crush Washer (Drain Plug Gasket) – https://amzn.to/4orgbF7 - Torque Wrench – https://amzn.to/4otkQXh - Oil Filter Wrench Tool (Better one) – https://amzn.to/4qkGwX9 - Funnel – https://amzn.to/3Jem1L2 - Ratchet & Extension Set - 12mm & 14mm Socket ⚙️ Torque Specs - Oil Drain Plug: 30 ft-lbs - Oil Filter Housing: 18 ft-lbs - Oil Filter Drain Cap: 10 ft-lbs 🔁 Oil Capacity - 6.1 – 6.2 quarts of 0W-20 synthetic oil 👍 If this video helped you out, consider subscribing for more Toyota DIYs and maintenance guides!