Fix It Finder

How to Replace a Window Regulator & Motor on a Honda Civic (2012–2015 9th Gen) | Step-by-Step

YOUCANIC · 16K views · 4:43

Skill Level

Intermediate

Time Required

Half day

Estimated Cost

$50–200

Equipment

Honda Civic 2012-2015 9th Gen

Permit Required

No

Tools Needed

screwdrivers, panel removal tools, socket set
Is your Honda Civic power window stuck, moving slowly, grinding, or completely dead? The most common cause is a failed window regulator or regulator motor. In this video, we walk you through the complete replacement process step by step — from removing the door panel to installing the new regulator assembly and testing the window. ✅ WHAT THIS VIDEO COVERS 🔧 Removing the door panel on a 9th gen Honda Civic without breaking clips 🔧 Disconnecting the window switch and electrical connectors 🔧 Supporting and securing the window glass during the repair 🔧 Removing the old window regulator and motor assembly 🔧 Installing the new regulator motor and reassembling the door 🔧 Testing window operation and resetting the auto up/down function 📅 APPLICABLE YEARS / GENERATIONS - Honda Civic 9th Generation (2012–2015, US market) — sedan and coupe - Includes the 2013 refresh (procedure is the same) Note: 2011 Civics are 8th generation and 2016+ Civics are 10th generation — the door panel and regulator design differ on those models. 🚗 ALSO APPLIES TO THESE RELATED VEHICLES The Acura ILX (2013–2015) is built on the same 9th gen Civic platform and uses a very similar door and window regulator design, so this video may help ILX owners as well. The general diagnosis steps (testing the switch, motor, and regulator) apply to nearly any Honda or Acura with power windows, including the Accord, CR-V, and Fit — though regulator design and panel removal differ by model. 🔍 SEARCH TERMS Honda Civic window regulator replacement, Civic window motor not working, Honda Civic window stuck down, power window won't go up Civic, Civic door panel removal, window regulator motor 2012 2013 2014 2015 Civic, Honda window grinding noise, Civic auto window reset 💡 QUICK TIP Before buying a regulator, test the switch first — swap the driver's switch operation to the affected door or check for voltage at the motor connector. A dead switch or broken wire in the door jamb boot can mimic a failed regulator motor. 👉 For more step-by-step repair guides, diagnostic help, and tools, visit https://youcanic.com