Fix It Finder

Your LG Washer Won't Spin? Test These Parts Before Calling a Technician

AppliancePartsPros · 5K views · 4:25

Skill Level

Intermediate

Time Required

Half day

Estimated Cost

$50–200

Equipment

LG

Tools Needed

multimeter
LG front load washer not spinning? This guide walks you step-by-step through checking the tub bearing, spider assembly, rotor, stator, and main control board with a multimeter so you can pinpoint the problem and get your washer spinning again. 🛒 Find parts: https://www.appliancepartspros.com/lg-washer-parts.html 📞 For help locating the part for your model, call us at 1-877-477-7278 or chat with us on our website http://www.appliancepartspros.com/ 💬 Need help? Ask in our forum: https://forum.appliancepartspros.com ⏱️ CHAPTERS: 0:00 Introduction and spin problem overview 0:34 Tools needed and safety reminder 1:00 Check tub bearings by spinning basket by hand 1:18 Check spider assembly by rocking basket and watching gap 1:36 Remove rear access panel and rotor inspection 2:01 Remove stator and disconnect wiring 2:10 Test stator resistance with a multimeter 2:43 Diagnose likely main control board failure 2:58 Remove top panel and access main control board 3:18 Remove and disconnect old main control board 3:40 Install new main control board and reassemble top 4:00 Reinstall stator, rotor, and rear access panel 4:18 Power up washer and closing advice 🔧 Tools mentioned: phillips screwdriver, flathead screwdriver, multimeter, 10mm socket, 17mm socket, mallet, hammer 📚 New to multimeters? Watch our Multimeter Masterclass: https://www.youtube.com/watch?v=8p0uj2tnDlg Follow us: Facebook: https://www.facebook.com/appliancepartspros | Reddit: https://www.reddit.com/r/AppliancePros/ #LGWasher #WasherNotSpinning #WasherRepair #ApplianceRepair #DIY #Troubleshooting #Fix #HowToFix