DIY: Ford Edge 2.0 Ecoboost 6F35 Easy Transmission Change Drain and Fill

I'll show you how to quickly and easily do a transmission fluid change drain and fill for your 2.0 Ford Edge. This was done on a 2018 model, however will be the same for any 2.0 Ecoboost Ford Edge and other models with the 6F35 transmission. (Escape, Fusion, Explorer, etc) You'll need: One 5qt jug of Motorcraft Mercon LV transmission fluid. You'll only need about 4 quarts. A 10mm hex socket w/ratchet and extensions A 7mm socket for the air dam bolts A 11mm wrench or socket for the drain bolt Four floor jacks or a lift. The vehicle should be level when you do this. A scanner to check transmission fluid temperature. It will need to be between 185° - 200° F after fill. Any cheap scanner will show this. You can buy a jug of Mercon LV here: - https://amzn.to/45PS0Hz As an Amazon Associate I earn from qualifying purchases. I earn a small commission if you click my links and make a purchase at no additional cost to you. #fordedge #transmissionfluidchange #livingontheedge