How to replace the Front Brakes 2015 - 2020 Ford F-150 🚗

Find the parts used in the video on CarParts.com just there https://carparts.solutions/F150Gen13 Over 1 million auto parts at your fingertips, download our app 🤖 https://carparts.solutions/AppGooglePlay or 🍎 https://carparts.solutions/AppIOS ⚙️ NEEDED CARPARTS AND PRODUCTS - Brake discs: https://carparts.solutions/FrontBrakeDiscs_F150Gen13 - Brake pads: https://carparts.solutions/FrontBrakePads_F150Gen13 - Brake cleaner: https://carparts.solutions/BrakeCleaner - Copper grease 💪 TIGHTENING TORQUES - Slide pin: 27 Ft-lbs - Brake caliper mount bolts: 184 Ft-lbs - Wheel lug nuts: 150 Ft-lbs 🛠 TOOLS The toolbox recommended by CARPARTS.COM to repair your Ford F-150: https://carparts.solutions/ToolBox List of the tools we used to replace the Front Brakes on a Ford F-150: - Hydraulic jack: https://carparts.solutions/FloorJack - Jack stands: https://carparts.solutions/JackStands - 24 mm wrench - Brake wind-back Tool: https://carparts.solutions/BrakePistonTool - Fork - Wheel lug wrench - Torque wrench: 20 to 250 Ft-lbs https://carparts.solutions/TorqueWrench_20-250 100 to 600 Ft-lbs https://carparts.solutions/TorqueWrench_100-600 - Ratchet - Flat head screwdriver - 10 mm socket - 14 mm socket - 21 mm socket - Hammer - Wire brush - Cloth - Clamp or iron wire - Paper towels Don't forget to subscribe: https://www.youtube.com/@CarPartscomOfficial 🛻 COMPATIBLE VEHICLES The operation and tools displayed in the video should be available on the following vehicles : - 2015 F-150 - 2016 F-150 - 2017 F-150 - 2018 F-150 - 2019 F-150 - 2020 F-150 📽 🛠 USEFUL VIDEOS 🛠 📽 - How to jack your F-150 safely? ⬆ 🚗 : https://youtu.be/ituyC_UZIsA - How to replace front brakes, rotors and pads (Complete guide) 🚘 : https://youtu.be/zTMADtYhnlg ⚠️ CARPARTS.COM'S INFOS - Once the operation is completed, you'll need pump slowly on the brake pedal a few times until feeling a strong resistance from the pedal. The aim being to bring the brake pads closer to one other. - Don't burn yourself on the pads if you've just gone for a drive as braking creates friction and long-lasting heat. - When replacing brake discs, you also need to replace the brake pads. This is a mandatory procedure. - Drive smoothly and avoid sudden braking for the first 30 miles or so, to avoid glazing the new pads. What do we mean by "glazing new brake pads"? Brake pads are made of a material that needs to be run-in when new. If this procedure is not done properly, when braking too hard, the material overheats and hardens. Consequently, the brakes become less effective." 🚨 DISCLAIMER This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area. 📚 CHAPTERS 0:00 Intro + how to pull up your F-150 0:24 Remove the brake caliper 1:34 Remove the pads 1:45 Remove the anti-rattle clips 2:02 Remove the caliper mount 2:18 Remove the rotor 2:28 Clean the Wheel hub 2:38 Prepare the new rotor 2:58 Put the new rotor back + Clean the caliper mount 3:13 Put the caliper mount back + Tightening torque 3:41 Prepare the installation of the new pads 4:00 Insert the new brake pads 4:10 Press the pistons 4:36 Check the slide pins 4:46 Put the caliper back + Tightening torque 5:11 Safety tips 5:32 Put your F-150 back on the ground 5:45 Tips