Ford F150 2.7 ecoboost starter removal (really easy)

You will need an 8mm socket, 13mm socket, and a 10mm socket. Ratchet and a few minutes of time. Drop the passenger side of the rear splash shield by unscrewing the two 8mm fasteners. Or all 4 to remo e cover completely. Take out the two 13mm bolts holding starter in. Lower the starter between the stabilizer bar and frame cross brace. Remove rubber cap and remove the 13mm nut to the high voltage cable. Then the 10mm nut to the signal wire. When putting back together just use a snug wrist tightness on those nuts.