iPhone 13 Apple’s Official Battery Replacement Service #iphone #videoviral #foryou #fixprice

Instructions: 1. Preparation: • Turn off your iPhone 13. • Remove the two Pentalobe screws next to the lightning connector. • Heat the edge of the display with a hairdryer or iOpener to soften the adhesive. 2. Carefully open the display: • Attach the suction cup just above the charging port and pull lightly to create a small gap. • Use a pick or spudger to carefully loosen the display all around. • Do not open the display completely, but open it like a book to the right side. 3. Disconnect the battery connector: • Remove the cover of the battery connector screws with the tri-point screwdriver (Y000). • Disconnect the battery connector with a spudger to avoid short circuits. 4. Remove the display completely (optional, but recommended): • Remove the other covers and disconnect the display cables. • Put the display aside. 5. Remove the old battery: • Carefully pull out the adhesive strips under the battery. If they tear, you can release the battery with a spudger and some isopropanol. • Be careful not to bend or damage the battery. 6. Insert the new battery: • Place the new battery and secure it with new adhesive strips. • Reconnect the battery connector. 7. Reassembly: • Reconnect the display and attach the covers. • Carefully press the display back into the frame. • Retighten the two pentalobe screws. 8. Function test: • Turn on the iPhone and check that it starts up normally. • If Face ID doesn't work, the display may not be connected properly. Note: On the iPhone 13, replacing the battery may cause iOS to report an “unknown battery” because Apple requires authentication with the original battery. However, this does not affect functionality. If you are unsure, I recommend having the replacement carried out by a professional repair service.