Oven Will Not Light | How to Replace Igniter in Whirlpool Oven

A Whirlpool gas oven that won't light but clicks or glows is a failed igniter — it's glowing but not drawing enough current to open the gas valve. This $30 OEM part replaces in 20 minutes. Here's how. 📋 Free Home Maintenance Checklist → https://the-struggle-bus.beehiiv.com PRODUCTS USED & RECOMMENDED: → Whirlpool WP9758079 Gas Range Oven Igniter Replacement: https://amzn.to/4uyIPal DIAGNOSIS: → Igniter glows orange but oven doesn't light → weak igniter (replace) → No glow at all → check continuity with a multimeter; failed igniter OR failed ignition module → Igniter glows and oven lights briefly then goes out → thermocouple or gas pressure issue REPLACEMENT STEPS: 1. Unplug the oven 2. Remove the oven bottom panel (2 screws) 3. Remove the wire harness connector from the igniter 4. Remove 2 mounting screws and pull out the old igniter 5. Install new igniter with 2 screws, connect harness, replace panel, test PRO TIP: Order by model number, not just "Whirlpool igniter." Different Whirlpool models use different amperages. Wrong amperage = won't light. Subscribe for weekly DIY home repair: https://www.youtube.com/@Housebarons As an Amazon Associate I earn from qualifying purchases. This helps support the channel at no extra cost to you. #WhirlpoolOven #OvenIgniter #GasOvenRepair #OvenNotLighting #ApplianceRepair