🔧 2018-2022 Camry 2.5 Transmission Fluid Change UB80E

Fill plug: 24mm, 29 ft-lbs (39Nm) Drain plug: 10mm hex, 15 ft-lbs (20Nm) Level check plug: 6MM hex (hand tight only) Quinn 1/2" Drive Torque Wrench: https://www.harborfreight.com/12-in-drive-digital-torque-wrench-64916.html This video doesn't cover the filter replacement, and this is not something you should typically have to replace, but I get questions on it in the comments so here is a link. Filter and gasket kit: https://amzn.to/3RGJs18 1 gallon of Valvoline MaxLife ATF: https://amzn.to/3vL6isv *or* Toyota WS Fluid: https://amzn.to/46brxUA Hand pump: https://amzn.to/3XDmUi4 Drain plug crush washer: https://amzn.to/3NpK88D These are both the same scanner: Innova 5610: https://amzn.to/3ZFN3hc Zurich ZR15s: https://www.harborfreight.com/zr15s-obd2-code-reader-with-35-in-display-and-active-testfixassist-57662.html Target temp: 95F-113F (35C-45C) 0:00 objective 1:06 accessing the fill plug 1:42 removing the fill plug 2:20 removing the drain plug and fill level tube, draining the fluid 3:26 reinstalling the fill level tube and drain plug 4:05 fluid type 4:41 refilling the transmission 5:14 installing the fill plug 5:50 accessing transmission temp 6:36 removing drain plug to set level 7:56 reinstalling the drain plug #toyotacamry #transmissionservice #transmissionfluid #camry As an Amazon Associate, I earn from qualifying purchases. For your convenience, I try to post links to everything I use in the video description. That's part of how I cover the costs of this channel. I appreciate your support buy using these links!!